DS4 1st STAGE DIN
![](/img/m/35.jpg)
Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF
SPOOL VIOLET 15 M
![](/img/m/35.jpg)
3 L STEEL DILUENT CYLINDER W/ VALVE
![](/img/m/34.jpg)
3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO
R17 SENSOR FOR VN202 OXYGEN ANALYZER
![](/img/m/580.jpg)
QUICK-LINK S.S.
![](/img/m/153.jpg)
CO23 UNDERWATER CUT-OFF SAW
![](/img/m/525.jpg)
The Stanley Hidraulica Submarine CO23 Circular Saw was designed for use underwater, but it is also a very useful tool on land. The CO23 uses wet or dry abrasive diamond discs, with a standard 10 inch (25.4 cm) diameter for cutting metals or concrete.
ULB-350 LOW COST LOCATION BEACON
![](/img/m/450.jpg)
This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.
THERMODIVE UNDERSUIT SHIRT
![](/img/m/540.jpg)
Thermodive Undersuit Shirt are designed to provide the thermal protection and comfort needed to dive with a dry neoprene suits Trilaminated dry suits serve as a thermal complement to thermal interiors of greater weight The shirt has clasps in the cuffs specially designed so the shirt can be worn without the sleeves bunching up and they do not interfere the cuffs sealing
BIG POCKET FOR SUIT
![](/img/m/153.jpg)
SL 17K & KM 37 HELMET SPARES KIT P/N 525-350
![](/img/m/285.jpg)
KM Part 525-350
SL 17K & KM 37 Helmet Spares Kit with 455 Balanced Regulator
LP 600 NITROX ROTARY
![](/img/m/114.jpg)
At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.
DPR-275 DIVER PINGER RECEIVER
![](/img/m/450.jpg)
This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.
SITECH BALANCED PEE VALVE
![](/img/m/509.jpg)
SIDEMOUNT SMS 100 REGULATOR KIT
![](/img/m/239.jpg)
2 L STEEL OXYGEN CYLINDER W/ VALVE
![](/img/m/34.jpg)
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap
RING 17 WING
![](/img/m/153.jpg)
THERMODIVE UNDERSUIT PANTS
![](/img/m/540.jpg)
Thermodive Undersuit Pants are designed to provide the thermal protection and comfort needed to dive with a dry neoprene suits Trilaminated dry suits serve as a thermal complement to thermal interiors of greater weight The trousers have clips at the end of the legs to prevent them from bunching up when the user inserts their legs into the dry suit and also has a drawstring in the waistband
TACTIX® CHARLIE WATCH
![](/img/m/211.jpg)
Combining specialized tactical functions with smart features for fitness training and outdoor navigation, our tactix Charlie multisport GPS watch is the one you’ll want for demanding environments — anywhere from field ops to corporate office. The ultra-rugged, all-black watch features routable color TOPO maps, wrist-based heart rate, fitness training metrics, night vision goggle compatibility and more. Its DLC coated titanium bezel maximizes resistance to abrasion and corrosion.