DL07 SERIES DRILL

The Stanley DL07 Series drill has a 1/2-inch capacity for drilling into wood, metal, or masonry.

HYDRAULIC IMPACT WRENCH IW12

Stanley hydraulic impact wrenches for subsea applications are designed to meet the most stringent subsea screwdriving requirements. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The power-to-weight ratio of this equipment has no comparison with an impact wrench of this type on the market.

SEIKA GPS SYSTEM FOR SUEX DPV

Suex brought the GPS signal underwater in wireless mode - SEIKA transmits the position to all ERON D-1s in the water. SEIKA uses an embedded GNSS (Global Navigation Satellite System) receiver within an SMB (Surface Marker Buoy) to capture precise diver position and communicate wireless that position to the Suex Eron D-1 dashboard.

HYDRAULIC IMPACT WRENCH IW16 CE

Stanley hydraulic impact wrenches for underwater applications are designed for the most demanding requirements of underwater screwing. The rugged design incorporates an integrated motor and rugged mechanism for severe railroad maintenance requirements. The power to weight ratio of this equipment has no comparison with an impact wrench of this type on the market.

HYDRAULIC IMPACT WRENCH IW16

Stanley hydraulic impact wrenches for underwater applications are designed for the most demanding requirements of underwater screwing. The rugged design incorporates an integrated motor and rugged mechanism for severe railroad maintenance requirements. The power to weight ratio of this equipment has no comparison with an impact wrench of this type on the market.

HYDRAULIC IMPACT WRENCH ID07 CE

The ID07 is a high torque impact wrench used for tightening and loosening nuts and screwing lag bolts. It applies impact torque up to 500 ft-lb /675 Nm. Available with friction ring or bolt type retaining socket.

HYDRAULIC IMPACT WRENCH ID07

The ID07 is a high torque impact wrench used to adjust and loosen nuts and bolts. Apply a maximum impact torque of 675 Nm. Available with friction ring or bolt retainer sleeve.

IW24 HYDRAULIC IMPACT WRENCH

Stanley hydraulic impact wrenches for underwater applications are designed to meet the most stringent requirements for underwater screwing. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The weight ratio -The power of this equipment has no comparison with an impact wrench of this type on the market.

SUBMERSIBLE PUMP SM20

The SM20 submersible pump is self-priming and can run dry without damage. It has the capacity to pump 250 gpm (946 lpm) and move solids up to 8 mm in diameter, making it an extremely powerful and reliable pump.

SUBMERSIBLE PUMP SM21

Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump releases no less than 500 gallons per minute (1890 bpm) and its small size allows it to fit into an 11 inch deep by 10 inch square (26.7 cm x 25.4 cm) box.

SUBMERSIBLE PUMP SM50

Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump discharges no less than 500 gallons per minute (1890 lpm) and its small size allows it to fit into a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).

WASTE PUMP TP03

The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in). 

WASTE PUMP TP08

The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.

EVO-2 GUN CAVITCLEANER

Evo2 is the Cavitcleaner cavitation gun capable of removing any type of encrustation, from light encrustation to acorn shells and mussels. The Evo2 is easy to use, easy to use and among its strengths is safe use even for less experienced operators. It is available in several times: S, M, L. It is compatible with most high pressure machines.

ATEX CHAINSAW

The hydraulic chain saw with chain brake in compliance with appendix IV of Directive 2006/42/EC. Without cutting equipment, including hydraulic hoses and water connection hose.

CLEANING TOOL MC111

The MC111 rotary tool is designed for cleaning boats, propellers and thrusters. It can be easily carried into recessed areas and niches.

MC131 CLEANING TOOL

The MC131 is a unique and powerful tool unit designed to clean all types of marine fouling, from smaller yachts and boats to offshore oil and gas platforms. The rotational speed of the brush is adjustable by the diver to achieve an optimum cleaning rate in hours.

MC212 CLEANING TOOL

The MC212 underwater cleaning unit has a history of over 30 years of service. This tool consists of two halves connected by hinged joints and is designed to clean light and heavy marine fouling from offshore oil and gas platforms, piers, pilings, windmills and other curved structures, as well as medium-sized vessels.

MC313 CLEANING TOOL

The unique design of the MC313 brush underwater cleaning unit withstands the most difficult underwater cleaning conditions encountered on various types of boats. The downward pressure of the brushes can be adjusted throughout the operation so that hull contours can be cleaned.