ON/OFF REGULATOR VALVE SHORT

On / off valve that opens or closes the air flow into the hose line where it is installed. Ideal to place on the second stage regulator due to its small size. Approximate length: 4.5 cm

VITON O-RINGS (14 Sizes)

O-rings box Viton 85 material shore A hardness, compatible with oxygen; with 14 different sizes and 10 units of each measure. 

ALUMINIUM GOODMAN HANDLE ADJUSTABLE

TDS Goodman handle made of lightweight anodized aluminum. The height of the handle is adjustable by lateral screws (including a spare one), allowing it to be adjusted to the size of our hand and / or to use with or without gloves. These screws are adjusted using an allen wrench included with the handle.

LEFT TWIN VALVE CAP

Modular side right-type valves cap, to close the side exit to exit manifold or modular plug.

WRIST WET NOTE

Underwater slate, with a special shape that fits to the wrist or forearm and allows place with other instruments without any disturb.

CHEMICAL LIGHT

Chemical light signaling stick. Simply break internal capsule, shake and looks between 8 to 12 hours. Ideal for marking a position on land and underwater

RIGHT TWIN VALVE CAP BLACK

Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.

WET NOTE CORDURE COVER

TDS slate book with 40 waterproof pages and cordura cover with small pockets. Includes graphite pen attached with bungee to one edge of the cover. Allows writing in and out of the water.

LEFT TWIN VALVE CAP BLACK

Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.

BACKPLATE WEIGHT POCKET 4.5 KG (Pair)

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

M25 VALVE 1 EXIT 300 BAR VALVE

Valve with M25 thread and toroidal sealing (not EN144) DIN output with a working pressure of 300 b. Black plastic knob. The valves are shipped with seals and lubricants compatible for oxygen.

BATTERY FOR MARU 1500 USB-C LIGHT (18650)

TDS 18650 lithium battery USB-C for Maru 1500 diving light: Ion-Lithium battery 18650 USB-C type, compatible with TDS Maru 1500. It is also valid for other light models that uses this type of battery.  Voltage: 3.6 V

BATTERY FOR KAVE 2000 USB-C LIGHT (26650)

TDS 26650 lithium battery USB-C for Kave 2000 diving light: Ion-Lithium battery 26650 USB-C type, compatible with TDS Kave 2000. It is also valid for other light models that uses this type of battery.  Voltage: 3.6 V

3/4 GAS VALVE 1 EXIT

Single valve to old tanks of 3/4 Gas (3/4 NPSM), DIN/INT connection. Hand Wheel Grip in black rubber on lef.

18650 BATTERY MARU/DZENOT

tds samsung 18650 lithium battery maru dzenot: Samsung Ion-Lithium battery 18650 type, compatible with TDS Maru and DZenot lights. It is also valid for other light models that uses this type of battery. Capacity: 2600 mAh, Voltage: 3.7 V

18650 BATTERY CHARGER MARU/DZENOT

Sanyo battery charger for 18650 Lithium-Ion batteries type, compatible with TDS Maru and DZenot lights. Incorporates a single socket to charge one battery.

TOOTHED STOPER S.S. 50 MM

Toothed stainless steel stopper that functions as a retainer on any nylon webbing. Ideal for the assembly of harnesses in technical diving. Also serves as a retainer for lead pads on belts with nylon webbing, being much more resistant than traditional plastic retainers.

18650 BATTERY & CHARGER MARU/DZENOT

Samsung lithium battery 18650 type, with Sanyo charger compatible with TDS Maru and DZenot lights. The charger is automatic with charge led indicator. Battery capacity: 2600 mAh, Battery voltage: 3.7V

SMOOTH STOPER ALUMIIUM BLACK 50 MM

Smooth aluminium stopper that functions as a retainer on any nylon webbing. Ideal for the assembly of harnesses in technical diving. Also serves as a retainer for lead pads on belts with nylon webbing, being much more resistant than traditional plastic retainers.

D RING + TOOTHED STOPPER 90 DEGREES S.S.

90 degree d-ring stopper in stainless steel. The rigid assembly facilitates insertion and attachment of carabiners, hitch accessories, harnesses, or belts. This 90 degree angle piece is suitable for shoulder harnesses in Tec diving.