BLACK TEK SHORTS WITH POCKETS
![](/img/m/540.jpg)
TDS bermuda shorts with pockets are perfect for use with wet suits or dry suits that do not have pockets, for an additional storage system, so necessary in technical diving, and also very useful in recreational dives.
WRIST DEPTH GAUGE 70 M
![](/img/m/540.jpg)
Wrist analog depth gauge up to 70 m, with maximum depth marker. Very useful in apnea or spearfishing lowered to control depth.
S80/S63 ALUMINIUM TANK BOTTOM
![](/img/m/540.jpg)
Tank bottom for aluminum tanks in S80 and S63 format. Protect the bottom of the bottles from bumps and scratches. Color: Black
BLACK WEIGHT POCKET 2.3 KG UNIT
![](/img/m/540.jpg)
High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.
2nd STAGE 90° REVOLVING CONNECTOR
![](/img/m/540.jpg)
Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.
M26 OXYGEN VALVE 232 B
![](/img/m/540.jpg)
Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.
A700 SECOND STAGE
![](/img/m/483.jpg)
M25X2 VALVE 232 B BLACK
![](/img/m/540.jpg)
M 25x2 cylinder therad and EN144-1. Standard Yoke Outlet with a Spin-Out Threaded DIN Adapter. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.
ACCESSORIES POCKET BLACK
![](/img/m/540.jpg)
Heavy duty cordura accessory holder pocket for harness or jacket, perfect for carrying small accessories and even a spare mask . Ideal to place on harness webbing, jacket and even on belts with webbing up to 50 mm.
G260 SECOND STAGE
![](/img/m/483.jpg)
S600 SECOND STAGE
![](/img/m/483.jpg)
TWIN RIGHT VALVE M25 232 BAR WITHOUT CAP
![](/img/m/540.jpg)
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.
REGULATOR NECK BAND
![](/img/m/540.jpg)
Elastic rubber band for fixing the emergency regulator to the neck. Easy to locate and can even keep the second stage fixed to the mouth in an emergency situation.
M25 TWIN RIGHT VALVE WO/ CAP 232 B
![](/img/m/540.jpg)
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold.
TWIN RIGHT VALVE BLACK M25 232 BAR WITHOUT CAP
![](/img/m/540.jpg)
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.
ON/OFF REGULATOR VALVE LONG FLOWSTOP
![](/img/m/540.jpg)
On / off valve that opens or closes the air flow into the hose line where it is installed. It can be installed on any standard LP regulator hose. Approximate length: 7.8 cm
TWIN LEFT VALVE BLACK M25 232 BAR WITHOUT CAP
![](/img/m/540.jpg)
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.
ALUMINIUM TEK GOODMAN HANDLE ADJUSTABLE
![](/img/m/540.jpg)
TDS Goodman type handle made of lightweight anodized aluminum. The height of the handle is adjustable by means of a side screw with a wide knob, allowing it to be adjusted to the size of our hand and/or to the use with or without gloves. It is possible to adjust the height in immersion because it is not necessary to use a wrench.