ON/OFF REGULATOR VALVE LONG FLOWSTOP
![](/img/m/540.jpg)
On / off valve that opens or closes the air flow into the hose line where it is installed. It can be installed on any standard LP regulator hose. Approximate length: 7.8 cm
On / off valve that opens or closes the air flow into the hose line where it is installed. It can be installed on any standard LP regulator hose. Approximate length: 7.8 cm
Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.
TDS Goodman type handle made of lightweight anodized aluminum. The height of the handle is adjustable by means of a side screw with a wide knob, allowing it to be adjusted to the size of our hand and/or to the use with or without gloves. It is possible to adjust the height in immersion because it is not necessary to use a wrench.
On / off valve that opens or closes the air flow into the hose line where it is installed. Ideal to place on the second stage regulator due to its small size. Approximate length: 4.5 cm
O-rings box Viton 85 material shore A hardness, compatible with oxygen; with 14 different sizes and 10 units of each measure.
TDS Goodman handle made of lightweight anodized aluminum. The height of the handle is adjustable by lateral screws (including a spare one), allowing it to be adjusted to the size of our hand and / or to use with or without gloves. These screws are adjusted using an allen wrench included with the handle.
Modular side right-type valves cap, to close the side exit to exit manifold or modular plug.
Underwater slate, with a special shape that fits to the wrist or forearm and allows place with other instruments without any disturb.
Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug.
TDS slate book with 40 waterproof pages and cordura cover with small pockets. Includes graphite pen attached with bungee to one edge of the cover. Allows writing in and out of the water.
Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.
Valve with M25 thread and toroidal sealing (not EN144) DIN output with a working pressure of 300 b. Black plastic knob. The valves are shipped with seals and lubricants compatible for oxygen.
TDS 18650 lithium battery USB-C for Maru 1500 diving light: Ion-Lithium battery 18650 USB-C type, compatible with TDS Maru 1500. It is also valid for other light models that uses this type of battery. Voltage: 3.6 V
TDS 26650 lithium battery USB-C for Kave 2000 diving light: Ion-Lithium battery 26650 USB-C type, compatible with TDS Kave 2000. It is also valid for other light models that uses this type of battery. Voltage: 3.6 V
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S80 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
Single valve to old tanks of 3/4 Gas (3/4 NPSM), DIN/INT connection. Hand Wheel Grip in black rubber on lef.
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S40 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
tds samsung 18650 lithium battery maru dzenot: Samsung Ion-Lithium battery 18650 type, compatible with TDS Maru and DZenot lights. It is also valid for other light models that uses this type of battery. Capacity: 2600 mAh, Voltage: 3.7 V
Sanyo battery charger for 18650 Lithium-Ion batteries type, compatible with TDS Maru and DZenot lights. Incorporates a single socket to charge one battery.
Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.
Samsung lithium battery 18650 type, with Sanyo charger compatible with TDS Maru and DZenot lights. The charger is automatic with charge led indicator. Battery capacity: 2600 mAh, Battery voltage: 3.7V
Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.