RIGHT TWIN VALVE CAP
Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug.
Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug.
TDS slate book with 40 waterproof pages and cordura cover with small pockets. Includes graphite pen attached with bungee to one edge of the cover. Allows writing in and out of the water.
Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.
Valve with M25 thread and toroidal sealing (not EN144) DIN output with a working pressure of 300 b. Black plastic knob. The valves are shipped with seals and lubricants compatible for oxygen.
TDS 18650 lithium battery USB-C for Maru 1500 diving light: Ion-Lithium battery 18650 USB-C type, compatible with TDS Maru 1500. It is also valid for other light models that uses this type of battery. Voltage: 3.6 V
TDS 26650 lithium battery USB-C for Kave 2000 diving light: Ion-Lithium battery 26650 USB-C type, compatible with TDS Kave 2000. It is also valid for other light models that uses this type of battery. Voltage: 3.6 V
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S80 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
Single valve to old tanks of 3/4 Gas (3/4 NPSM), DIN/INT connection. Hand Wheel Grip in black rubber on lef.
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S40 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
tds samsung 18650 lithium battery maru dzenot: Samsung Ion-Lithium battery 18650 type, compatible with TDS Maru and DZenot lights. It is also valid for other light models that uses this type of battery. Capacity: 2600 mAh, Voltage: 3.7 V
Sanyo battery charger for 18650 Lithium-Ion batteries type, compatible with TDS Maru and DZenot lights. Incorporates a single socket to charge one battery.
Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.
Samsung lithium battery 18650 type, with Sanyo charger compatible with TDS Maru and DZenot lights. The charger is automatic with charge led indicator. Battery capacity: 2600 mAh, Battery voltage: 3.7V
Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve.
Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.
Twins valve for 18 liters long cylinders (216 mm diameter). With metric thread M 25x2 EN144. Manifold connection without isolating valve
Manifold with isolation valve for twins mounting. 171 mm for 10/12 long twins. Matt black finish of the military series.
Twins valve for 10 or 12 liters in long form cylinders (171 mm diameter). With metric M25x2 EN144 thread . Manifold connection with isolation valve. Matt black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.
Manifold with isolation valve for twins mounting. Different measures depending on the cylinders of the set: 171 mm, 180 mm (aluminium) and 203 mm
tds elastic cord bungee 6 mm by meters:Elastic cord - bungee type 6 mm thick for many uses both in technical diving, as recreational: 2nd stage hang neck, fastening computers, tanks, sidemount ... etc. Color Black. Sold by 200 m reel
Without isolation valve manifold for mounting twins. Different measures depending on thecylinders of the set: 171 mm for 10/12 liters long twins, 203 mm for 12/15 liters twins
Toothed stainless steel stopper that functions as a retainer on any nylon webbing. Ideal for the assembly of harnesses in technical diving. Also serves as a retainer for lead pads on belts with nylon webbing, being much more resistant than traditional plastic retainers.
Smooth aluminium stopper that functions as a retainer on any nylon webbing. Ideal for the assembly of harnesses in technical diving. Also serves as a retainer for lead pads on belts with nylon webbing, being much more resistant than traditional plastic retainers.
90 degree d-ring stopper in stainless steel. The rigid assembly facilitates insertion and attachment of carabiners, hitch accessories, harnesses, or belts. This 90 degree angle piece is suitable for shoulder harnesses in Tec diving.