STREAM RING 20 WING STRIPE

Circular style wing for diving with doubles. STREAM RING 20 was designed for diving with double tanks from 2x7-2x12 and stage. Due to the small profile, along with sufficient lift, this wing is especially suitable for recreational and also tec diving.

ON/OFF REGULATOR VALVE SHORT

On / off valve that opens or closes the air flow into the hose line where it is installed. Ideal to place on the second stage regulator due to its small size. Approximate length: 4.5 cm

VITON O-RINGS (14 Sizes)

O-rings box Viton 85 material shore A hardness, compatible with oxygen; with 14 different sizes and 10 units of each measure. 

ALUMINIUM GOODMAN HANDLE ADJUSTABLE

TDS Goodman handle made of lightweight anodized aluminum. The height of the handle is adjustable by lateral screws (including a spare one), allowing it to be adjusted to the size of our hand and / or to use with or without gloves. These screws are adjusted using an allen wrench included with the handle.

LEFT TWIN VALVE CAP

Modular side right-type valves cap, to close the side exit to exit manifold or modular plug.

BACKPLATE WEIGHT POCKET 4.5 KG (Pair)

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

WRIST WET NOTE

Underwater slate, with a special shape that fits to the wrist or forearm and allows place with other instruments without any disturb.

WET NOTE CORDURE COVER

TDS slate book with 40 waterproof pages and cordura cover with small pockets. Includes graphite pen attached with bungee to one edge of the cover. Allows writing in and out of the water.

WEIGHT POCKET FOR BACK PLATE (Pair)

Ballast system consists of 2 pockets, which are slipped on a waist strap and fastened to a backplate (pair of bolts and nuts included). Left pocket has a D-ring for mounting a pressure gauge. Inside each pocket is an inner pocket with a handle for inserting the weights.

TRIM POCKETS FOR BACKPLATE

Small pockets for attachment to the backplate. Each pocket can carry one piece of weight block (dimensions 8x10x3 cm, 1,5-2 kg). Price is for 1 pair (2 pieces).

M25 VALVE 1 EXIT 300 BAR VALVE

Valve with M25 thread and toroidal sealing (not EN144) DIN output with a working pressure of 300 b. Black plastic knob. The valves are shipped with seals and lubricants compatible for oxygen.

TRIM POCKET 2 KG (Unit)

Small pocket for attachment to the strap exactly where you need it. It can carry one piece of weight block (dimensions 8x10x3 cm, 1,5-2 kg). Price is for 1 piece.

WET NOTE

Indispensable for every diver, sailor or tourist. This waterproof notebook, is made of plastic sheets and designed to write underwater. The cover is of cordure.It has pockets for pens or compass and has an eye for a carabiner hook with double trigger.

18650 BATTERY MARU/DZENOT

tds samsung 18650 lithium battery maru dzenot: Samsung Ion-Lithium battery 18650 type, compatible with TDS Maru and DZenot lights. It is also valid for other light models that uses this type of battery. Capacity: 2600 mAh, Voltage: 3.7 V

TANK STRAP S.S. BUCKLE

Indestructible buckle, HDPE pad, protecting the bottle from scratching, strap made from non-elongation material. Stitched on a strip of antislip rubber.

S80 STAGE TANK HARNESS

Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S80 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.

18650 BATTERY CHARGER MARU/DZENOT

Sanyo battery charger for 18650 Lithium-Ion batteries type, compatible with TDS Maru and DZenot lights. Incorporates a single socket to charge one battery.

3/4 GAS VALVE 1 EXIT

Single valve to old tanks of 3/4 Gas (3/4 NPSM), DIN/INT connection. Hand Wheel Grip in black rubber on lef.

S40 STAGE TANK HARNESS

Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S40 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.