LP 250 NITROX ROTARY

Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.

XK DPV

Suex XK DPV Scooter: Durable, high-performance DPV for the most demanding professionals. XK is the DPV for technical/professional use: it enables long-range and cave exploration thanks to its Li-ION battery that offers 330 minutes at cruising speed and 100 minutes at maximum speed (100 m/min). Depths of up to 200 metres can be reached with XK.

LP 300 NITROX ROTARY

The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.

SINAPSI NOSE FOR SUEX DPV

Sinapsi Nose forSuex DPV: SINAPSI is a special nose for navigation that replaces the standard nose. It is equipped with sophisticated electronics to receive and process underwater navigation data acquired via DPV. The SINAPSI project has required years of increasingly sophisticated research, including many tests and trials to optimise the system using the most exciting, up-to-date technological solutions.

LP 600 NITROX ROTARY

At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.

ERON D-1 FOR SUEX DPV

Suex Eron D-1 Dshaboard for Suex Scooter DPV: Dashboard for monitoring and navigation for Suex DPV. Wireless DPV data reception. Can be mounted on DPV holder or worn on the wrist. One-touch function activation. Remaining autonomy in minutes at set speed. DPV battery state of charge. Instantaneous consumption. Water speed (available with Sinapsi nose). Distance travelled in water (available with Sinapsi nose)

SEIKA GPS SYSTEM FOR SUEX DPV

Suex brought the GPS signal underwater in wireless mode - SEIKA transmits the position to all ERON D-1s in the water. SEIKA uses an embedded GNSS (Global Navigation Satellite System) receiver within an SMB (Surface Marker Buoy) to capture precise diver position and communicate wireless that position to the Suex Eron D-1 dashboard.

FILLING PANEL FOR COMPRESSOR

It has two gauges (one for each pressure) for controlling the load pressure. With its internal pressure regulator, you have the ability to offer dual pressure load (2 outputs and 2 outputs 300 bar to 225 bar).

FILLING PANEL FOR COMPRESSOR WITH CAMS

Panel loading with 4 exits for connection to any compressor Coltri range. It has manometer to control the load pressure. Combined with a bank of air, it can be an ideal place for a bottle loading station configuration.

MOLECULAR SIEVE

Molecular absorbent canister (alumina), to fill the cartridge air purifier filter used in MCH13-16-36 compressor.

ACTIVATED CARBON

Activated carbon canister parts to fill the cartridge air purifier filter used in MCH13-16-36 compressors.