SIDEMOUNT D RING S.S 50 MM

tds sidemount d ring stainless steel 50 mm: TDS 50 mm stainless steel D Ring, specially designes for sidemount harness.

450-550-650-750 ET SILENT COMPRESSOR...

Coltri 450-550-650-750 ETS Silent Scuba Diving High Pressure Compressor Threephasic: The SILENT model represents excellence in soundproofing. It has been designed to meet the needs of very intensive uses and when large filling capacities are required. Equipped with 4 front filling connections for high pressure hoses (from 232 to 420 bar), a control panel and an electrical display. They are equipped with a three-phase electric motor and powerful pumping units (450 550 650 750 depending on the specific model). 

COMFORT TECHNICAL HARNESS

Technical harness for back plate mounting with all necessary components included and fully adjustable. Mounting and dismounting the back plate is very versatile, as it is fixed with screws of the twin cylinders themselves

450-550-650-750 ET OPEN COMPRESSOR (Threephasic)

Coltri 450-550-650-750 ET Open threephasic Commercial Diving High Pressure Compressor: Open meets professional needs that require large charging capacities in hot, poorly ventilated or tropical countries. It is equipped with 4 front filling connections for high pressure hoses, an intuitive control panel and an electric motor. The pumping unit, chosen from the 4 most powerful, is exposed in the rear part of the structure to ensure a better cooling cycle. For longer filter life, the Tornado high pressure dryer is recommended

LP 250 NITROX ROTARY

Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.

SVALBARD THINSULATE THERMAL UNDERWEAR

The Svalbard undergarment from TDS has been made with the best current thermal protection material: Thinsulate. Lightweight and elastic, the Svalbard offers a very comfortable fit thanks to an elaborate pattern, as well as being the ideal complement to any dry suit.

LP 300 NITROX ROTARY

The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.

THERMODIVE UNDERSUIT SHIRT

Thermodive Undersuit Shirt are designed to provide the thermal protection and comfort needed to dive with a dry neoprene suits Trilaminated dry suits serve as a thermal complement to thermal interiors of greater weight The shirt has clasps in the cuffs specially designed so the shirt can be worn without the sleeves bunching up and they do not interfere the cuffs sealing

LP 600 NITROX ROTARY

At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.

THERMODIVE UNDERSUIT PANTS

Thermodive Undersuit Pants are designed to provide the thermal protection and comfort needed to dive with a dry neoprene suits Trilaminated dry suits serve as a thermal complement to thermal interiors of greater weight The trousers have clips at the end of the legs to prevent them from bunching up when the user inserts their legs into the dry suit and also has a drawstring in the waistband

FILLING PANEL FOR COMPRESSOR

It has two gauges (one for each pressure) for controlling the load pressure. With its internal pressure regulator, you have the ability to offer dual pressure load (2 outputs and 2 outputs 300 bar to 225 bar).

FILLING PANEL FOR COMPRESSOR WITH CAMS

Panel loading with 4 exits for connection to any compressor Coltri range. It has manometer to control the load pressure. Combined with a bank of air, it can be an ideal place for a bottle loading station configuration.

MOLECULAR SIEVE

Molecular absorbent canister (alumina), to fill the cartridge air purifier filter used in MCH13-16-36 compressor.

ACTIVATED CARBON

Activated carbon canister parts to fill the cartridge air purifier filter used in MCH13-16-36 compressors.

BLACK WEIGHT POCKET 2.3 KG UNIT

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.

BLACK TEK SHORTS WITH POCKETS

TDS bermuda shorts with pockets are perfect for use with wet suits or dry suits that do not have pockets, for an additional storage system, so necessary in technical diving, and also very useful in recreational dives.