2 L STEEL OXYGEN CYLINDER W/ M26 VALVE
2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap
TEK3 REGULATORS SET
Apeks has developed unique first stages specifically for use on a twinset. The benefits of this system are that there is a minimised risk of accidental snagging, no hose kinking and easier access to the manifold valves. Each first stage has three medium pressure ports and one high pressure port. They are over-balanced, cold water compatible and extremely robust. TEK3 looks great too!
R22 VAN OXYGEN SENSOR FOR DIVESOFT
2 L STEEL DILUENT CYLINDER W/ VALVE
2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap
R22AT OXYGEN SENSOR FOR ATA
XTX 200 REGULATOR DIN
R22 DEM OXYGEN SENSOR FOR ANALOX OE II (OLD)
1.5 L ALUMINIUM ARGON CYLINDER
BASIC HARNESS
XTX 50 REGULATOR DIN
1.0 L ALUMINIUM ARGON CYLINDER
BLACK TEK SHORTS WITH POCKETS
TDS bermuda shorts with pockets are perfect for use with wet suits or dry suits that do not have pockets, for an additional storage system, so necessary in technical diving, and also very useful in recreational dives.
R33 D1 SENSOR FOR ANALOX/MIXCHEK ANALYZERS
WRIST DEPTH GAUGE 70 M
Wrist analog depth gauge up to 70 m, with maximum depth marker. Very useful in apnea or spearfishing lowered to control depth.
S80/S63 ALUMINIUM TANK BOTTOM
Tank bottom for aluminum tanks in S80 and S63 format. Protect the bottom of the bottles from bumps and scratches. Color: Black
POCKETS TECH SHORTS
BLACK WEIGHT POCKET 2.3 KG UNIT
High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.
2nd STAGE 90° REVOLVING CONNECTOR
Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.
M26 OXYGEN VALVE 232 B
Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.