SAFE HARNESS
![](/img/m/373.jpg)
With a phenomenal overall breaking strength of 1000kg, the All New Northern Diver R-Vest has surpassed the requirements set by the ‘Association of Diving Contractors International’ Standards.
With a phenomenal overall breaking strength of 1000kg, the All New Northern Diver R-Vest has surpassed the requirements set by the ‘Association of Diving Contractors International’ Standards.
The "X-VISION" CCTV has been designed in order to be able to record underwater images with one, two three or four divers in the water. Its robust and modern design makes it stand out from other CCTVs.
The SBQ CONTROL II panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
The Mini-Com control unit is a device designed as an underwater communication system between the surface caller and one or two divers.
The “vest style” safety harness that distributes the load over the whole body. This harness supports the fully equipped diver safely and comfortably. With stainless steel straps and D-rings with high load capacity and bottom rings for tools or hookah closures.
High definition camera with stainless steel housing for use with a video cable or umbilical, focused on professional diving due to its resistance to harsh environments and its versatility.
The SBQ CONTROL III panel is a portable power system with control and monitoring for diving operations with surface air supply for three divers. The system was designed to supply air from the surface and control the depth of the divers.
The Subcom Control Unit is a device designed as an underwater communication system between the surface caller and one or two divers. Thanks to the 4-wire communication, divers can communicate with each other.
The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 º. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.
The Amcom International Communicator by Amcom ™ I with rechargeable battery features 20 watts of audio power. It features an MP3 connection that allows you to listen to your favorite music while you work.
Neutrally buoyant TV cable for underwater CCTV systems. 1 coaxial cable. 2 wires of 0.25 mm + screen. 2 wires of 0.75 mm. 2 wires of 1 mm. 1 cable loose.
The SBQ CONTROL I panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
The 2830A Amcom Series ™ III has the same features of our ™ II Amcom Series Communications. These superior communicators, utilize independent volume controls for each diver and each tender for both uplink and downlink paths.
Divers' ability to become neutrally buoyant, slightly positive, or slightly negative greatly aids the approach to the job site. It allows for a faster approach by a rescue diver, the ability to donate gas to the distressed diver (if his umbilical has been compromised), and a faster return through buoyancy control of both rescuer and patient
KMACS 5 NO COMMUNICATIONSThe Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations.
Diver Recall/Hydrophone (DRS-100B). Complete system including the LL-98 speaker (transducer), hand held mic, batteries and charger. The DRS-100B Diver Recall/Hydrophone systems is U.S. Navy Approved and used by Naval Special Warfare units, salvage divers, and recreational dive boats around the world.
The KMACS-5 is a lightweight, portable air supply, depth control and communications panel for two divers.
Divex MK2 work boots serve to improve diver safety and the life of all types of wetsuits, even in the most difficult conditions, protecting the lower extremities.
The Aquacom® STX-101M surface system for communications is a 10 watt, 8 channel communication band transceiver designed to meet the most stringent demands of military divers. Compatible with virtually all Aquacom® OTS and Buddy Phone® transceivers.
The Aquacom® SSB-2010 5 watt underwater single sideband, multi-channel transceiver SSB-2010 designed with Search and Rescue professionals in mind. The Aquacom® SSB-2010 can be configured to work with virtually any style face mask (FFM). With the addition of a CDK-6, the Aquacom® SSB-2010 easily converts to a portable surface station.
Synergy HSE two-diver inshore panels are built specifically for non-imca shore diving operations. Each diver has 1 independent HP supply line and 1 independent LP supply line per diver. Inlet and outlet fittings can be provided from the side, top or bottom of the panel. We can supply as a portable panel or mounted on a frame for permanent installation.
The OTS headset and microphone set are designed to allow the user to connect wired communications to a hard hat or full face mask (FFM). Due to the many styles of masks on the market, OTS offers a wide variety of communications kit. The configurations can be endless depending on the application.
The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.
The CDK-6 surface accessory kit is designed to convert an SSB-2010, SSB-2001B-2 or SSB-1001B into a portable surface station. After a quick and easy installation, you can talk to other divers and/or surface stations within range and on the same channel.