DL07 SERIES DRILL
![](/img/m/525.jpg)
The Stanley DL07 Series drill has a 1/2-inch capacity for drilling into wood, metal, or masonry.
HYDRAULIC IMPACT WRENCH IW12
![](/img/m/525.jpg)
Stanley hydraulic impact wrenches for subsea applications are designed to meet the most stringent subsea screwdriving requirements. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The power-to-weight ratio of this equipment has no comparison with an impact wrench of this type on the market.
INT VALVE WO/PURGE FOR MCH6 COMPRESSOR
![](/img/m/114.jpg)
Load valve without purging and INT connection, valid for compressors Coltri MCH 6 portable.
HYDRAULIC IMPACT WRENCH IW16 CE
![](/img/m/525.jpg)
Stanley hydraulic impact wrenches for underwater applications are designed for the most demanding requirements of underwater screwing. The rugged design incorporates an integrated motor and rugged mechanism for severe railroad maintenance requirements. The power to weight ratio of this equipment has no comparison with an impact wrench of this type on the market.
DIN VALVE W/PURGUE FOR MCH 13/16 COMPRESSOR
![](/img/m/114.jpg)
Load valve purge stop valve and connection DIN 200 valid for compressors Coltri MCH 13/16 series.
HYDRAULIC IMPACT WRENCH IW16
![](/img/m/525.jpg)
Stanley hydraulic impact wrenches for underwater applications are designed for the most demanding requirements of underwater screwing. The rugged design incorporates an integrated motor and rugged mechanism for severe railroad maintenance requirements. The power to weight ratio of this equipment has no comparison with an impact wrench of this type on the market.
INT VALVE W/PURGE FOR MCH 13/16 COMPRESSOR
![](/img/m/114.jpg)
Load valve purge stop valve and connection INT valid for compressors Coltri MCH 13/16 series.
HYDRAULIC IMPACT WRENCH ID07 CE
![](/img/m/525.jpg)
The ID07 is a high torque impact wrench used for tightening and loosening nuts and screwing lag bolts. It applies impact torque up to 500 ft-lb /675 Nm. Available with friction ring or bolt type retaining socket.
HYDRAULIC IMPACT WRENCH ID07
![](/img/m/525.jpg)
The ID07 is a high torque impact wrench used to adjust and loosen nuts and bolts. Apply a maximum impact torque of 675 Nm. Available with friction ring or bolt retainer sleeve.
IW24 HYDRAULIC IMPACT WRENCH
![](/img/m/525.jpg)
Stanley hydraulic impact wrenches for underwater applications are designed to meet the most stringent requirements for underwater screwing. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The weight ratio -The power of this equipment has no comparison with an impact wrench of this type on the market.
MCH13/16 (T) INTAKE AIR FILTER CARTRIDGE
![](/img/m/114.jpg)
MCH30/36 INTAKE AIR FILTER CARTRIDGE
![](/img/m/114.jpg)
MCH36 AIR FILTER CARTRIDGE
![](/img/m/114.jpg)
Aluminum filter cartridge to the filter system model Coltri compressors MCH36.
MCH13/16 AIR FILTER CARTRIDGE
![](/img/m/114.jpg)
coltri mch13/16 air fliter cartridge: Propylene filter cartridge to the filter system of compressors Coltri MCH13 / 16 model
SUBMERSIBLE PUMP SM20
![](/img/m/525.jpg)
The SM20 submersible pump is self-priming and can run dry without damage. It has the capacity to pump 250 gpm (946 lpm) and move solids up to 8 mm in diameter, making it an extremely powerful and reliable pump.
SUBMERSIBLE PUMP SM21
![](/img/m/525.jpg)
Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump releases no less than 500 gallons per minute (1890 bpm) and its small size allows it to fit into an 11 inch deep by 10 inch square (26.7 cm x 25.4 cm) box.
SUBMERSIBLE PUMP SM50
![](/img/m/525.jpg)
Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump discharges no less than 500 gallons per minute (1890 lpm) and its small size allows it to fit into a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).
WASTE PUMP TP03
![](/img/m/525.jpg)
The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in).
WASTE PUMP TP08
![](/img/m/525.jpg)
The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.