CESTA LITE COMPACT 2 DIVERS
![](/img/m/479.jpg)
With the Lars system, Lite Compact Basket for 2 plongeurs, a special option to offer an option that is extremely compact with the standard release and recovery systems proposed by us. The size is adjusted according to the possibility of managing the moins of the place possible and the transport is also economical as possible.
GREEN RIVER W/O COVER
![](/img/m/479.jpg)
KNIFE GREEN RIVER 16 CM WITHOUT TIP AND CASE
![](/img/m/479.jpg)
The favorite knife of professionals, due to its robustness and size. Special for cutting big ends, pipes, etc.
MK5 SECURITY HARNESS
![](/img/m/145.jpg)
The “vest style” safety harness that distributes the load over the whole body. This harness supports the fully equipped diver safely and comfortably. With stainless steel straps and D-rings with high load capacity and bottom rings for tools or hookah closures.
SHARK-EYE CAMERA 700 LINES
![](/img/m/479.jpg)
High definition camera with stainless steel housing for use with a video cable or umbilical, focused on professional diving due to its resistance to harsh environments and its versatility.
PVL CUTTING SYSTEM
![](/img/m/479.jpg)
Oxygen and propylene cutting system sub-system: Oxygen and propylene cutting system, clean cut without residue. Easy handling Robust 2 models: 55 degrees or 90 degrees
CHEMICAL LIGHT
![](/img/m/479.jpg)
GREEN RIVER SHEATH YELLOW
![](/img/m/479.jpg)
CASE KNIFE GREEN RIVER + SNAPLINK + EXTENSIBLE
![](/img/m/479.jpg)
Hard plastic case for the Green River knife. This allows for better transport and prevents accidental cuts.
MK2 SAFE BOOTS
![](/img/m/145.jpg)
Divex MK2 work boots serve to improve diver safety and the life of all types of wetsuits, even in the most difficult conditions, protecting the lower extremities.
AH5 FREE FLOW HELMET
![](/img/m/145.jpg)
The Divex AH5 is the successor to the Divex AH3 and AH4, the helmets which have been chosen by most professional divers as standards of safety, quality, performance and reliability.
LIFTING BALLOONS OPEN W / VALVE
![](/img/m/479.jpg)
Parachute de levage ouvert subacqua: Parachute de levage I made in nylon avec des coutures renforcées et thermoscells pour eviter les fissures et les pertes d'air. Les attaches au ballon sont faites d'anneaux joints inoxydables au nylon au moyen d'un thermoscellage très robuste pour éviter les ruptures ou les déchirures
BR67 UNDERWATER BREAKER/DRIVER (With C.E.)
![](/img/m/525.jpg)
The BR67 is a medium sized breaker in Stanley Hydraulic Tools line up of underwater paving breakers. The BR67is in the 70 lbs class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving.
BR45 HYDRAULIC BREAKER (With C.E.)
![](/img/m/525.jpg)
The BR45 is the smallest breaker in the Stanley Hydraulic Tool lineup of underwater breakers. The feathering on/off valve controls speed and allows easier initial tool placement. Standard 1" hex chuck and latch retainer. Painted hi‑visibility yellow.
CH15 UNDERWATER CHIPPING HAMMER
![](/img/m/525.jpg)
The Stanley Submarine CH15 Breaker Hammer is a lightweight yet powerful alternative to pneumatic tools. Designed for medium and heavy duty jobs, due to its high power to weight ratio the CH15 becomes the ideal tool for scuba divers working in concrete.
CO23 UNDERWATER CUT-OFF SAW
![](/img/m/525.jpg)
The Stanley Hidraulica Submarine CO23 Circular Saw was designed for use underwater, but it is also a very useful tool on land. The CO23 uses wet or dry abrasive diamond discs, with a standard 10 inch (25.4 cm) diameter for cutting metals or concrete.
CS06 CHAIN SAW
![](/img/m/525.jpg)
The Stanley CS06 Underwater Hydraulic Chainsaw features a 15-inch saw and today offers the diver a tool with the highest power-to-weight ratio underwater on the market today.
CS11 UNDERWATER CHAIN SAW
![](/img/m/525.jpg)
The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.
DS11 CHAIN SAW
![](/img/m/525.jpg)
The DS11 Diamond Chain Saw is designed for cutting concrete underwater. It is suitable for cutting corners without overcuts and can cut walls up to 45 cm thick. Two bar lengths (38 cm and 45 cm) and two different types of chain are available. A minimum of 20 psi of water pressure is required at the saw to cool and lubricate the bar and chain.
GR29 UNDERWATER GRINDER CE W/COUPLERS
![](/img/m/525.jpg)
The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories