450-550-650-750 ET OPEN COMPRESSOR (Threephasic)
![](/img/m/114.jpg)
Coltri 450-550-650-750 ET Open threephasic Commercial Diving High Pressure Compressor: Open meets professional needs that require large charging capacities in hot, poorly ventilated or tropical countries. It is equipped with 4 front filling connections for high pressure hoses, an intuitive control panel and an electric motor. The pumping unit, chosen from the 4 most powerful, is exposed in the rear part of the structure to ensure a better cooling cycle. For longer filter life, the Tornado high pressure dryer is recommended
LP 250 NITROX ROTARY
![](/img/m/114.jpg)
Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.
PROBLENDER 1000 TRIMIX BLENDER
![](/img/m/382.jpg)
The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.
CS11 UNDERWATER CHAIN SAW
![](/img/m/525.jpg)
The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.
LP 300 NITROX ROTARY
![](/img/m/114.jpg)
The Coltri LP300 Nitrox ROTARY model consists of an industrial screw compressor that delivers air at a pressure of 12 bar to a membrane that separates nitrogen and oxygen up to a maximum percentage of 40% O2. The enriched air can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. The oxygen analyser allows checking of the correct percentage adjusted by means of the appropriate valve.
PROBLENDER 1000 NITROX BLENDER
![](/img/m/382.jpg)
The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.
LP 600 NITROX ROTARY
![](/img/m/114.jpg)
At the top of the Nitrox line, the Coltri LP600 ROTARY system consists of an industrial screw compressor that delivers air at a pressure of 8 bar to a membrane that separates nitrogen and oxygen at atmospheric pressure until Nitrox 40% O2 is obtained and can be compressed at a pressure of 232 bar in combination with a high pressure compressor. The percentage of oxygen obtained at the outlet can be regulated from 22.4% to 40% using a valve directly accessible on top of the compressor. Exclusive to the the Heavy Duty line compressors.
DS11 CHAIN SAW
![](/img/m/525.jpg)
The DS11 Diamond Chain Saw is designed for cutting concrete underwater. It is suitable for cutting corners without overcuts and can cut walls up to 45 cm thick. Two bar lengths (38 cm and 45 cm) and two different types of chain are available. A minimum of 20 psi of water pressure is required at the saw to cool and lubricate the bar and chain.
GR29 UNDERWATER GRINDER CE W/COUPLERS
![](/img/m/525.jpg)
The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories
FILLING PANEL FOR COMPRESSOR
![](/img/m/114.jpg)
It has two gauges (one for each pressure) for controlling the load pressure. With its internal pressure regulator, you have the ability to offer dual pressure load (2 outputs and 2 outputs 300 bar to 225 bar).
FILLING PANEL FOR COMPRESSOR WITH CAMS
![](/img/m/114.jpg)
Panel loading with 4 exits for connection to any compressor Coltri range. It has manometer to control the load pressure. Combined with a bank of air, it can be an ideal place for a bottle loading station configuration.
SK58 UNDERWATER SINKER DRILL
![](/img/m/525.jpg)
The Stanley SK58 drill is a heavy duty drill, designed for underwater operations in concrete, rock and masonry drilling.The SK58 uses industry standard drilling steels and can drill up to 6m depth. The direct motor drive drives the rotation on the 1 "x 4 1/4" hex shank of the drill steel, the rotation It can be set between 0 and 300 RPM.
HD45 UNDERWATER HAMMER DRILL (With C.E.)
![](/img/m/525.jpg)
The feathering on / off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Skil hex carbide tipped drill bits and is capable of drilling a 2 "diameter hole up to 29" deep.
MOLECULAR SIEVE
![](/img/m/114.jpg)
DL07 SERIES DRILL
![](/img/m/525.jpg)
The Stanley DL07 Series drill has a 1/2-inch capacity for drilling into wood, metal, or masonry.
ACTIVATED CARBON
![](/img/m/114.jpg)
Activated carbon canister parts to fill the cartridge air purifier filter used in MCH13-16-36 compressors.
HYDRAULIC IMPACT WRENCH IW12
![](/img/m/525.jpg)
Stanley hydraulic impact wrenches for subsea applications are designed to meet the most stringent subsea screwdriving requirements. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The power-to-weight ratio of this equipment has no comparison with an impact wrench of this type on the market.
HYDRAULIC IMPACT WRENCH IW16 CE
![](/img/m/525.jpg)
Stanley hydraulic impact wrenches for underwater applications are designed for the most demanding requirements of underwater screwing. The rugged design incorporates an integrated motor and rugged mechanism for severe railroad maintenance requirements. The power to weight ratio of this equipment has no comparison with an impact wrench of this type on the market.
INT VALVE WO/PURGE FOR MCH6 COMPRESSOR
![](/img/m/114.jpg)
Load valve without purging and INT connection, valid for compressors Coltri MCH 6 portable.
HYDRAULIC IMPACT WRENCH IW16
![](/img/m/525.jpg)
Stanley hydraulic impact wrenches for underwater applications are designed for the most demanding requirements of underwater screwing. The rugged design incorporates an integrated motor and rugged mechanism for severe railroad maintenance requirements. The power to weight ratio of this equipment has no comparison with an impact wrench of this type on the market.
DIN VALVE W/PURGUE FOR MCH 13/16 COMPRESSOR
![](/img/m/114.jpg)
Load valve purge stop valve and connection DIN 200 valid for compressors Coltri MCH 13/16 series.