CESTA LITE COMPACT 2 DIVERS

With the Lars system, Lite Compact Basket for 2 plongeurs, a special option to offer an option that is extremely compact with the standard release and recovery systems proposed by us. The size is adjusted according to the possibility of managing the moins of the place possible and the transport is also economical as possible.

GREEN RIVER W/O COVER

The commercial diver´s favorite knife, very robust and large. Ideal for cutting large ropes and hoses.

SHARK-EYE CAMERA 700 LINES

High definition camera with stainless steel housing for use with a video cable or umbilical, focused on professional diving due to its resistance to harsh environments and its versatility.

PVL CUTTING SYSTEM

Oxygen and propylene cutting system sub-system: Oxygen and propylene cutting system, clean cut without residue. Easy handling Robust 2 models: 55 degrees or 90 degrees

CHEMICAL LIGHT

Chemical light signaling stick. Simply break internal capsule, shake and looks between 8 to 12 hours. Ideal for marking a position on land and underwater

DPR-275 DIVER PINGER RECEIVER

This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.

ATT-400 ACOUSTIC TARGET TRANSPONDER

The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.

ULB-350 LOW COST LOCATION BEACON

This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.

LIFTING BALLOONS OPEN W / VALVE

Parachute de levage ouvert subacqua: Parachute de levage I made in nylon avec des coutures renforcées et thermoscells pour eviter les fissures et les pertes d'air. Les attaches au ballon sont faites d'anneaux joints inoxydables au nylon au moyen d'un thermoscellage très robuste pour éviter les ruptures ou les déchirures

PRS275 PINGER RECEIVER SYSTEM

The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.

MC131 CLEANING TOOL

The MC131 is a unique and powerful tool unit designed to clean all types of marine fouling, from smaller yachts and boats to offshore oil and gas platforms. The rotational speed of the brush is adjustable by the diver to achieve an optimum cleaning rate in hours.

MC212 CLEANING TOOL

The MC212 underwater cleaning unit has a history of over 30 years of service. This tool consists of two halves connected by hinged joints and is designed to clean light and heavy marine fouling from offshore oil and gas platforms, piers, pilings, windmills and other curved structures, as well as medium-sized vessels.

CLEANING TOOL MC111

The MC111 rotary tool is designed for cleaning boats, propellers and thrusters. It can be easily carried into recessed areas and niches.

MC313 CLEANING TOOL

The unique design of the MC313 brush underwater cleaning unit withstands the most difficult underwater cleaning conditions encountered on various types of boats. The downward pressure of the brushes can be adjusted throughout the operation so that hull contours can be cleaned.