USBL EASYTRAK

Easytrak is a compact Ultra Short Baseline (USBL) system designed for the efficient tracking of underwater targets such as divers, ROVs, AUVs and tow fish.

JET FIN XTREM BLACK

The TDS Jet Fin Xtreme fin is one of the shortest fins of its kind, with a lateral reinforcement and designed to make it more maneuverable, which makes it very popular, like its predecessor, among technical and professional divers. Made of 100% rubber and with a compact design for superior mobility, it incorporates a dynamic edge for more powerful thrust, this design reduces drag on the up kick and improves the thrust on the up kick the bottom.

BR-22 CUTTING TORCH

For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.

JET FIN XTREM YELLOW

The TDS Jet Fin Xtreme fin is one of the shortest fins of its kind, with a lateral reinforcement and designed to make it more maneuverable, which makes it very popular, like its predecessor, among technical and professional divers. Made of 100% rubber and with a compact design for superior mobility, it incorporates a dynamic edge for more powerful thrust, this design reduces drag on the up kick and improves the thrust on the up kick the bottom.

LARGE FLOW RATE REDUCER 02 HVR

The Broco Oxygen Regulator is a two-stage unit with a high continuous flow for underwater combustion. Broco's studies show that the efficiency of the cut depends more on the flow of oxygen than on its pressure.

JET FIN XTREM RED

The TDS Jet Fin Xtreme fin is one of the shortest fins of its kind, with a lateral reinforcement and designed to make it more maneuverable, something that makes it very popular, like its predecessor, among technical and professional divers. Made of 100% rubber and with a compact design for superior mobility, it incorporates a dynamic edge for a more powerful thrust, this design reduces drag on the up kick and improves thrust on the down kick.

JET FIN MSP

TDS Jet Fin MSP belongs to the tactical-military range, tested by different armies and special forces. Jet Fin type rubber fin "long" with traditional design, also available to technical and sport divers, as well as professional divers, looking for a powerful and immediate response fin. Made of 100% rubber, it offers a very high durability over time as well as resistance in the worst conditions.

NORWAY DRYSUIT

The TDS Norway drysuit, along with its twin the Quebec, are the range in compressed neoprene of TDS watertight suits. The Norway model, is the variant more directed towards the technical diver, which stands out for incorporating a pocket of ample dimensions and a closure in feet of sock type to be able to use with a Rock boot to taste and making the whole suit lighter, also making possible to be able to turn the suit of complete menara.

WELDING CLAMP BR-21

BR21 broco type compression welding system is designed with superior features. The BR-21 is lightweight, rugged, and designed to hold the electrode at the optimum angle to reduce diver fatigue.

QUEBEC DRYSUIT

The TDS Quebec drysuit, along with its twin the Norway, are the compressed neoprene range of TDS drysuits. The Quebec model includes a boot with a very light rigid sole, a feature that makes it very appreciated even by professional and commercial divers in their work. It also has a large pocket and flexible knee pads for protection.

CLEANING TOOL MC111

The MC111 rotary tool is designed for cleaning boats, propellers and thrusters. It can be easily carried into recessed areas and niches.

BR-22 PLUS CUTTING TORCH

For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.

OMAHA XTREM 2.1 ROCKBOOT

The Xtrem 2.1 is the improved model of the Omaha series of Rockboots for sock dry suits, the most advanced of TDS, used by armies and water rescue brigades. Redesigned sole is more flexible and made of an ultra-resistant material, which gives it a much better grip than previous models. It also has drainage holes for faster drying.

MC131 CLEANING TOOL

The MC131 is a unique and powerful tool unit designed to clean all types of marine fouling, from smaller yachts and boats to offshore oil and gas platforms. The rotational speed of the brush is adjustable by the diver to achieve an optimum cleaning rate in hours.

MC212 CLEANING TOOL

The MC212 underwater cleaning unit has a history of over 30 years of service. This tool consists of two halves connected by hinged joints and is designed to clean light and heavy marine fouling from offshore oil and gas platforms, piers, pilings, windmills and other curved structures, as well as medium-sized vessels.

GR UEI KNIFE FLAT TIP

The TDS GR UEI knife is a diving knife built with the robustness necessary for the most demanding jobs and responding to all the circumstances in which it is necessary to use it. Extended in military use, it has a design similar to that used by professional divers, but with a blade length of 10cm which makes it more manageable and with the flat tip.

BYLOT WETSUIT 7 MM

tds bylot abadon wetsuit 7 mm: tds bylot abadon 7 mm wetsuit, made of super elastic neoprene with sealed seams and reinforcements in high wear areas. Larrge pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.

KYDEX SEATH FOR GR UEI KNIFE

The Kydex sheath is specially designed for the TDS GR UEI short knife flat tip. Is named by the compound is manufactured: Kydex is a type of thermoplastic acrylic based on polyvinyl chloride, and has a wide variety of applications including aircraft bulkheads, gun cases, cases and pods.

  • New

MC313 CLEANING TOOL

The unique design of the MC313 brush underwater cleaning unit withstands the most difficult underwater cleaning conditions encountered on various types of boats. The downward pressure of the brushes can be adjusted throughout the operation so that hull contours can be cleaned.

ABADON WETSUIT 5 MM

Tds abadon 5 mm wetsuit, made of super elastic neoprene with sealed seams and much studied reinforcements in high wear areas. Larrge pocket for accessories. This suit model is used by various professional groups and rescue teams, as firefighters and technical divers.

SVALBARD THINSULATE THERMAL UNDERWEAR

The Svalbard undergarment from TDS has been made with the best current thermal protection material: Thinsulate. Lightweight and elastic, the Svalbard offers a very comfortable fit thanks to an elaborate pattern, as well as being the ideal complement to any dry suit.