BR-22 CUTTING TORCH
![](/img/m/85.jpg)
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
The “vest style” safety harness that distributes the load over the whole body. This harness supports the fully equipped diver safely and comfortably. With stainless steel straps and D-rings with high load capacity and bottom rings for tools or hookah closures.
The Broco Oxygen Regulator is a two-stage unit with a high continuous flow for underwater combustion. Broco's studies show that the efficiency of the cut depends more on the flow of oxygen than on its pressure.
BR21 broco type compression welding system is designed with superior features. The BR-21 is lightweight, rugged, and designed to hold the electrode at the optimum angle to reduce diver fatigue.
Exothermic cutting rods burn hot enough to cut ferrous and non-ferrous materials underwater
The MC111 rotary tool is designed for cleaning boats, propellers and thrusters. It can be easily carried into recessed areas and niches.
Divers' ability to become neutrally buoyant, slightly positive, or slightly negative greatly aids the approach to the job site. It allows for a faster approach by a rescue diver, the ability to donate gas to the distressed diver (if his umbilical has been compromised), and a faster return through buoyancy control of both rescuer and patient
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
The MC131 is a unique and powerful tool unit designed to clean all types of marine fouling, from smaller yachts and boats to offshore oil and gas platforms. The rotational speed of the brush is adjustable by the diver to achieve an optimum cleaning rate in hours.
Divex MK2 work boots serve to improve diver safety and the life of all types of wetsuits, even in the most difficult conditions, protecting the lower extremities.
Exothermic cutting rods burn hot enough to cut ferrous and non-ferrous materials underwater
The MC212 underwater cleaning unit has a history of over 30 years of service. This tool consists of two halves connected by hinged joints and is designed to clean light and heavy marine fouling from offshore oil and gas platforms, piers, pilings, windmills and other curved structures, as well as medium-sized vessels.
The unique design of the MC313 brush underwater cleaning unit withstands the most difficult underwater cleaning conditions encountered on various types of boats. The downward pressure of the brushes can be adjusted throughout the operation so that hull contours can be cleaned.
The Divex AH5 is the successor to the Divex AH3 and AH4, the helmets which have been chosen by most professional divers as standards of safety, quality, performance and reliability.