Active filters
LATEST NEWS
The SBQ CONTROL II panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
The Hydroweld EH400 underwater welding gun is used throughout industry. Among its advantages, it should be noted that they are economical, very light and resistant. They are distributed together with a cable of approximately 2 meters and 50 mm2 terminated by a male Dinze type connector
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
The SBQ CONTROL III panel is a portable power system with control and monitoring for diving operations with surface air supply for three divers. The system was designed to supply air from the surface and control the depth of the divers.
The Broco Oxygen Regulator is a two-stage unit with a high continuous flow for underwater combustion. Broco's studies show that the efficiency of the cut depends more on the flow of oxygen than on its pressure.
Oxygen and propylene cutting system sub-system: Oxygen and propylene cutting system, clean cut without residue. Easy handling Robust 2 models: 55 degrees or 90 degrees
The SBQ CONTROL I panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.
BR21 broco type compression welding system is designed with superior features. The BR-21 is lightweight, rugged, and designed to hold the electrode at the optimum angle to reduce diver fatigue.
KMACS 5 NO COMMUNICATIONSThe Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations.
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
The KMACS-5 is a lightweight, portable air supply, depth control and communications panel for two divers.
Synergy HSE two-diver inshore panels are built specifically for non-imca shore diving operations. Each diver has 1 independent HP supply line and 1 independent LP supply line per diver. Inlet and outlet fittings can be provided from the side, top or bottom of the panel. We can supply as a portable panel or mounted on a frame for permanent installation.
The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.
Synergy designed diving SRP's are one of our popular products and have been very well received in the diving industry. Manufactured with a stainless steel frame, 4 x 50 ltr x 200 bar lightweight carbon composite cylinders, all connected to an air management panel and the two diver panels for diver air supply and cylinder charging.
The FULL DIVING CONTROL SBQ panel is a portable control and monitoring supply system for surface supplied air diving operations for three divers. The system has been designed to supply air from the surface, control the depth of the divers, have communication and visualize the operations of the divers from the surface.
Synergy is pleased to present our latest portable three-diver panel built in accordance with IMCA D023, with analyzers, flow meters and flow restrictors, which meets all requirements for use according to D023 guidelines.
Cookie preferences
